Slugging percentage
SLG = \frac{TB}{AB} 
In baseball statistics, slugging percentage (abbreviated SLG) is a popular measure of the power of a hitter. It is calculated as total bases divided by at bats:
SLG = \frac{(\mathit{1B}) + (2 \times \mathit{2B}) + (3 \times \mathit{3B}) + (4 \times \mathit{HR})}{AB}
where AB is the number of atbats for a given player, and 1B, 2B, 3B, and HR are the number of singles, doubles, triples, and home runs, respectively. Walks are specifically excluded from this calculation. The name is a misnomer, as the statistic is not a percentage but a scale of measure whose computed value is a rational number in the interval \left[0, 4\right].
For example, in 1920, Babe Ruth played his first season for the New York Yankees. In 458 at bats, Ruth had 172 hits, comprising 73 singles, 36 doubles, 9 triples, and 54 home runs, which brings the total base count to (73 × 1) + (36 × 2) + (9 × 3) + (54 × 4) = 388. His total number of bases (388) divided by his total atbats (458) is .847, his slugging percentage for the season. The next year he slugged .846, and these records went unbroken until 2001, when Barry Bonds achieved 411 bases in 476 atbats, bringing his slugging percentage to .863, unmatched since.
Contents
 Significance 1
 Perfect slugging percentage 2
 See also 3
 References 4
 External links 5
Significance
Long after it was first invented, slugging percentage gained new significance when baseball analysts realized that it combined with onbase percentage (OBP) to form a very good measure of a player's overall offensive production (in fact, OBP + SLG was originally referred to as "production" by baseball writer and statistician Bill James). A predecessor metric was developed by Branch Rickey in 1954. Rickey, in Life magazine, suggested that combining OBP with what he called "extra base power" (EBP) would give a better indicator of player performance than typical Triple Crown stats. EBP was a predecessor to slugging percentage.^{[2]}
^{[3]} Bill James applied this principle to his runs created formula several years later (and perhaps independently), essentially multiplying SLOB × AtBats to create the formula:
RC=\frac{(Hits+Walks)(Total Bases)}{At Bats+Walks}
In 1984, Pete Palmer and John Thorn developed perhaps the most widespread means of combining slugging and onbase percentage: OPS. "OPS" simply stands for "onbase plus slugging", and is a simple addition of the two values. Because it is easy to calculate, OPS has been used with increased frequency in recent years as a shorthand form to evaluate contributions as a batter.
Perfect slugging percentage
The maximum numerically possible slugging percentage is 4.000. A few dozen players throughout history (107 as of August 2010) have momentarily had a 4.0 career average by homering in their first major league atbat.
No player has ever retired with a 4.000 slugging percentage, but four players tripled in their only atbat and therefore share the ML record, when calculated without respect to games played or plate appearances, of a career slugging percentage of 3.000. The players (and the seasons in which they had their only atbat) were: Eric Cammack (2000 Mets); Scott Munninghoff (1980 Phillies); Eduardo Rodriguez (1973 Brewers); and Charlie Lindstrom (1958 White Sox)^{[4]}
See also
References
 ^ "Career Leaders & Records for Slugging %". Baseball Reference. Retrieved 20140227.
 ^ Lewis, Dan (20010331). "Lies, Damn Lies, and RBIs". nationalreview.com. Retrieved 20120701.
 ^ Barra, Allen (20010620). "The best season ever?". Salon.com. Retrieved 20070715.
 ^ Spector, Jesse (20100529). "ExMet Eric Cammack is one of only four players to post career slugging percentage of 3.000". Daily News (New York).
External links
 Slugging Percentage Calculator
