Aluminium

Aluminium

Aluminium,  13Al
Spectral lines of aluminium
General properties
Name, symbol aluminium, Al
Appearance silvery gray metallic
Pronunciation UK

US
Alternative name aluminum (US)
Aluminium in the periodic table
B

Al

Ga
magnesiumaluminiumsilicon
Atomic number 13
Standard atomic weight (±) (Ar) 26.9815385(7)[1]
Element category   post-transition metal, sometimes considered a metalloid
Group, block group 13, p-block
Period period 3
Electron configuration [Ne] 3s2 3p1
per shell
2, 8, 3
Physical properties
Phase solid
Melting point 933.47 K ​(660.32 °C, ​1220.58 °F)
Boiling point 2743 K ​(2470 °C, ​4478 °F)
Density near r.t. 2.70 g/cm3
when liquid, at m.p. 2.375 g/cm3
Heat of fusion 10.71 kJ/mol
Heat of vaporization 284 kJ/mol
Molar heat capacity 24.20 J/(mol·K)
vapor pressure
P (Pa) 1 10 100 1 k 10 k 100 k
at T (K) 1482 1632 1817 2054 2364 2790
Atomic properties
Oxidation states 3, 2,[2] 1[3], −1, −2 ​(an amphoteric oxide)
Electronegativity Pauling scale: 1.61
Ionization energies 1st: 577.5 kJ/mol
2nd: 1816.7 kJ/mol
3rd: 2744.8 kJ/mol
(more)
Atomic radius empirical: 143 pm
Covalent radius 121±4 pm
Van der Waals radius 184 pm
Miscellanea
Crystal structure face-centered cubic (fcc)
Face-centered cubic crystal structure for aluminium
Speed of sound thin rod (rolled) 5000 m/s (at r.t.)
Thermal expansion 23.1 µm/(m·K) (at 25 °C)
Thermal conductivity 237 W/(m·K)
Electrical resistivity 28.2 nΩ·m (at 20 °C)
Magnetic ordering paramagnetic[4]
Young's modulus 70 GPa
Shear modulus 26 GPa
Bulk modulus 76 GPa
Poisson ratio 0.35
Mohs hardness 2.75
Vickers hardness 160–350 MPa
Brinell hardness 160–550 MPa
CAS Registry Number 7429-90-5
History
Prediction Antoine Lavoisier[5] (1787)
First isolation Hans Christian Ørsted[6] (1825)
Named by Humphry Davy[5] (1807)
Most stable isotopes
iso NA half-life DM DE (MeV) DP
26Al trace 7.17×105 y β+ 1.17 26Mg
ε 26Mg
γ 1.8086
27Al 100% 27Al is stable with 14 neutrons

Aluminium (or aluminum; see different endings) is a chemical element in the boron group with symbol Al and atomic number 13. It is a silvery-white, soft, nonmagnetic, ductile metal. Aluminium is the third most abundant element (after oxygen and silicon) in the Earth's crust, and the most abundant metal there. It makes up about 8% by mass of the crust, though it is less common in the mantle below. Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals.[7] The chief ore of aluminium is bauxite.

Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials, such as building facades and window frames. The most useful compounds of aluminium, at least on a weight basis, are the oxides and sulfates.

Despite its prevalence in the environment, no known form of life uses aluminium salts metabolically. In keeping with its pervasiveness, aluminium is well tolerated by plants and animals.[8] Owing to their prevalence, potential beneficial (or otherwise) biological roles of aluminium compounds are of continuing interest.

Contents

  • Characteristics 1
    • Physical 1.1
    • Chemical 1.2
    • Isotopes 1.3
    • Natural occurrence 1.4
  • Production and refinement 2
    • Recycling 2.1
  • Compounds 3
    • Oxidation state +3 3.1
      • Halides 3.1.1
      • Oxide and hydroxides 3.1.2
      • Carbide, nitride, and related materials 3.1.3
    • Organoaluminium compounds and related hydrides 3.2
    • Oxidation states +1 and +2 3.3
      • Aluminium(I) 3.3.1
      • Aluminium(II) 3.3.2
    • Analysis 3.4
  • Applications 4
    • General use 4.1
    • Aluminium compounds 4.2
      • Alumina 4.2.1
      • Sulfates 4.2.2
      • Chlorides 4.2.3
      • Niche compounds 4.2.4
    • Aluminium alloys in structural applications 4.3
  • History 5
    • Hall-Heroult process: availability of cheap aluminium metal 5.1
  • Etymology 6
    • Different endings 6.1
  • Biology 7
  • Health concerns 8
    • Occupational safety 8.1
    • Alzheimer's disease 8.2
  • Effect on plants 9
  • Biodegradation 10
  • See also 11
  • References 12
  • External links 13

Characteristics

"Red mud" storage facility in Stade, Germany. The aluminium industry generates about 70 million tons of this waste annually.

Physical

Aluminium is a relatively soft, durable, lightweight, ductile and malleable metal with appearance ranging from silvery to dull gray, depending on the surface roughness. It is nonmagnetic and does not easily ignite. A fresh film of aluminium serves as a good reflector (approximately 92%) of visible light and an excellent reflector (as much as 98%) of medium and far infrared radiation. The yield strength of pure aluminium is 7–11 MPa, while aluminium alloys have yield strengths ranging from 200 MPa to 600 MPa.[9] Aluminium has about one-third the density and stiffness of steel. It is easily machined, cast, drawn and extruded.

Aluminium atoms are arranged in a face-centered cubic (fcc) structure. Aluminium has a stacking-fault energy of approximately 200 mJ/m2.[10]

Aluminium is a good thermal and electrical conductor, having 59% the conductivity of copper, both thermal and electrical, while having only 30% of copper's density. Aluminium is capable of being a superconductor, with a superconducting critical temperature of 1.2 kelvin and a critical magnetic field of about 100 gauss (10 milliteslas).[11]

Chemical

Corrosion resistance can be excellent due to a thin surface layer of aluminium oxide that forms when the metal is exposed to air, effectively preventing further oxidation.[12] The strongest aluminium alloys are less corrosion resistant due to galvanic reactions with alloyed copper.[9] This corrosion resistance is also often greatly reduced by aqueous salts, particularly in the presence of dissimilar metals.

In highly acidic solutions aluminium reacts with water to form hydrogen, and in highly alkaline ones to form aluminates— protective passivation under these conditions is negligible. Also, chlorides such as common sodium chloride are well-known sources of corrosion of aluminium and are among the chief reasons that household plumbing is never made from this metal.[13]

However, owing to its resistance to corrosion generally, aluminium is one of the few metals that retain silvery reflectance in finely powdered form, making it an important component of silver-colored paints. Aluminium mirror finish has the highest reflectance of any metal in the 200–400 nm (UV) and the 3,000–10,000 nm (far IR) regions; in the 400–700 nm visible range it is slightly outperformed by tin and silver and in the 700–3000 (near IR) by silver, gold, and copper.[14]

Aluminium is oxidized by water at temperatures below 280 °C to produce hydrogen, aluminium hydroxide and heat:

2 Al + 6 H2O → 2 Al(OH)3 + 3 H2

This conversion is of interest for the production of hydrogen. Challenges include circumventing the formed oxide layer, which inhibits the reaction, and the expenses associated with the storage of energy by regeneration of the Al metal.[15]

Isotopes

Aluminium has many known isotopes, whose mass numbers range from 21 to 42; however, only 27Al (stable isotope) and 26Al (radioactive isotope, t1⁄2 = 7.2×105 y) occur naturally. 27Al has a natural abundance above 99.9%. 26Al is produced from argon in the atmosphere by spallation caused by cosmic-ray protons. Aluminium isotopes have found practical application in dating marine sediments, manganese nodules, glacial ice, quartz in rock exposures, and meteorites. The ratio of 26Al to 10Be has been used to study the role of transport, deposition, sediment storage, burial times, and erosion on 105 to 106 year time scales.[16] Cosmogenic 26Al was first applied in studies of the Moon and meteorites. Meteoroid fragments, after departure from their parent bodies, are exposed to intense cosmic-ray bombardment during their travel through space, causing substantial 26Al production. After falling to Earth, atmospheric shielding drastically reduces 26Al production, and its decay can then be used to determine the meteorite's terrestrial age. Meteorite research has also shown that 26Al was relatively abundant at the time of formation of our planetary system. Most meteorite scientists believe that the energy released by the decay of 26Al was responsible for the melting and differentiation of some asteroids after their formation 4.55 billion years ago.[17]

Natural occurrence

Stable aluminium is created when hydrogen fuses with magnesium, either in large stars or in supernovae.[18] It is estimated to be the 14th most common element in the Universe, by mass-fraction.[19] However, among the elements that have odd atomic numbers, aluminium is the third most abundant by mass fraction, after hydrogen and nitrogen.[20]

In the Earth's crust, aluminium is the most abundant (8.3% by mass) metallic element and the third most abundant of all elements (after oxygen and silicon).[21] The Earth's crust has a higher prevalence of aluminium than the rest of the planet, due to aluminium silicates in the crust. In the Earths mantle, which is only 2% aluminium by mass, these aluminium silicate minerals are largely replaced by silica and magnesium oxides. Overall, the Earth is about 1.4% aluminium by mass (eighth in abundance by mass). In the Earth as a whole, aluminium gains in abundance as compared with the Solar system and Universe, due to Earth's loss of a number of elements which are common in the universe, but which are volatiles at the Earth's distance from the Sun (hydrogen, helium, neon, nitrogen, carbon as hydrocarbon).

Because of its strong affinity to oxygen, aluminium is almost never found in the elemental state; instead it is found in oxides or silicates. Feldspars, the most common group of minerals in the Earth's crust, are aluminosilicates. Native aluminium metal can only be found as a minor phase in low oxygen fugacity environments, such as the interiors of certain volcanoes.[22] Native aluminium has been reported in cold seeps in the northeastern continental slope of the South China Sea and Chen et al. (2011)[23] have proposed a theory of its origin as resulting by reduction from tetrahydroxoaluminate Al(OH)4 to metallic aluminium by bacteria.[23]

It also occurs in the minerals beryl, cryolite, garnet, spinel and turquoise. Impurities in Al2O3, such as chromium or iron yield the gemstones ruby and sapphire, respectively.

Although aluminium is an extremely common and widespread element, the common aluminium minerals are not economic sources of the metal. Almost all metallic aluminium is produced from the ore bauxite (AlOx(OH)3–2x). Bauxite occurs as a weathering product of low iron and silica bedrock in tropical climatic conditions.[24] Large deposits of bauxite occur in Australia, Brazil, Guinea and Jamaica and the primary mining areas for the ore are in Australia, Brazil, China, India, Guinea, Indonesia, Jamaica, Russia and Suriname.

Production and refinement

Bauxite, a major aluminium ore. The red-brown color is due to the presence of iron minerals.

Bauxite is converted to aluminium oxide (Al2O3) via the Bayer process.[8] Relevant chemical equations are:

Al2O3 + 2 NaOH → 2 NaAlO2 + H2O
2 H2O + NaAlO2 → Al(OH)3 + NaOH

The intermediate sodium aluminate, given the simplified formula NaAlO2, is soluble in strongly alkaline water, and the other components of the ore are not. Depending on the quality of the bauxite ore, twice as much waste ("red mud") as alumina is generated.

The conversion of alumina to aluminium metal is achieved by the Hall-Héroult process. In this energy-intensive process, a solution of alumina in a molten (950 and 980 °C (1,740 and 1,800 °F)) mixture of cryolite (Na3AlF6) with calcium fluoride is electrolyzed to give the metal:

Al3+ + 3 e → Al(l)

At the anode, oxygen is formed:

2 O2− + C → CO2(g) + 4 e

The liquid aluminium metal then sinks to the bottom of the solution and is tapped off, usually cast into large blocks called aluminium billets for further processing. The carbon anode is consumed by reaction with oxide to form carbon dioxide gas. A small quantity of fluoride compounds flow with this gas. In modern smelters, this hot carbon dioxide gas is filtered through alumina to remove fluorine compounds and return fluorine as aluminium fluoride to the electrolytic cells. The anodes in a reduction cell must therefore be replaced regularly, since they are consumed in the process. The cathodes do erode, mainly due to electrochemical processes and liquid metal movement induced by intense electrolytic currents. After five to ten years, depending on the current used in the electrolysis, a cell must be rebuilt because of cathode wear.

World production trend of aluminium

Aluminium electrolysis with the Hall-Héroult process consumes a lot of energy. The worldwide average specific energy consumption is approximately 15±0.5 kilowatt-hours per kilogram of aluminium produced (52 to 56 MJ/kg). The most modern smelters achieve approximately 12.8 kW·h/kg (46.1 MJ/kg). (Compare this to the heat of reaction, 31 MJ/kg, and the Gibbs free energy of reaction, 29 MJ/kg.) Reduction line currents for older technologies are typically 100 to 200 kiloamperes; state-of-the-art smelters operate at about 350 kA. Trials have been reported with 500 kA cells.

The Hall-Heroult process produces aluminium with a purity of above 99%. Further purification can be done by the Hoopes process. The process involves the electrolysis of molten aluminium with a sodium, barium and aluminium fluoride electrolyte. The resulting aluminium has a purity of 99.99%.[8][25]

Electric power represents about 20% to 40% of the cost of producing aluminium, depending on the location of the smelter. Aluminium production consumes roughly 5% of electricity generated in the U.S.[26] Aluminium producers tend to locate smelters in places where electric power is both plentiful and inexpensive—such as the United Arab Emirates with its large natural gas supplies,[27] and Iceland[28] and Norway[29] with energy generated from renewable sources. The world's largest smelters of alumina are located in the People's Republic of China, Russia and the provinces of Quebec and British Columbia in Canada.[26][30][31]

Aluminium spot price 1987–2012

In 2005, the People's Republic of China was the top producer of aluminium with almost a one-fifth world share, followed by Russia, Canada, and the US, reports the British Geological Survey.

Over the last 50 years, Australia has become the world's top producer of bauxite ore and a major producer and exporter of alumina (before being overtaken by China in 2007).[30][32] Australia produced 77 million tonnes of bauxite in 2013.[33] The Australian deposits have some refining problems, some being high in silica, but have the advantage of being shallow and relatively easy to mine.[34]

Recycling

Aluminium recycling code

Aluminium is theoretically 100% recyclable without any loss of its natural qualities. According to the International Resource Panel's Metal Stocks in Society report, the global per capita stock of aluminium in use in society (i.e. in cars, buildings, electronics etc.) is 80 kg (180 lb). Much of this is in more-developed countries (350–500 kg (770–1,100 lb) per capita) rather than less-developed countries (35 kg (77 lb) per capita). Knowing the per capita stocks and their approximate lifespans is important for planning recycling.

Recovery of the metal via recycling has become an important use of the aluminium industry. Recycling was a low-profile activity until the late 1960s, when the growing use of aluminium beverage cans brought it to the public awareness.

Recycling involves melting the scrap, a process that requires only 5% of the energy used to produce aluminium from ore, though a significant part (up to 15% of the input material) is lost as dross (ash-like oxide).[35] An aluminium stack melter produces significantly less dross, with values reported below 1%.[36] The dross can undergo a further process to extract aluminium.

In Europe aluminium experiences high rates of recycling, ranging from 42% of beverage cans, 85% of construction materials and 95% of transport vehicles.[37]

Recycled aluminium is known as secondary aluminium, but maintains the same physical properties as primary aluminium. Secondary aluminium is produced in a wide range of formats and is employed in 80% of alloy injections. Another important use is for extrusion.

White dross from primary aluminium production and from secondary recycling operations still contains useful quantities of aluminium that can be extracted industrially.[38] The process produces aluminium billets, together with a highly complex waste material. This waste is difficult to manage. It reacts with water, releasing a mixture of gases (including, among others, hydrogen, acetylene, and ammonia), which spontaneously ignites on contact with air;[39] contact with damp air results in the release of copious quantities of ammonia gas. Despite these difficulties, the waste has found use as a filler in asphalt and concrete.[40]

Compounds

Oxidation state +3

The vast majority of compounds, including all Al-containing minerals and all commercially significant aluminium compounds, feature aluminium in the oxidation state 3+. The coordination number of such compounds varies, but generally Al3+ is six-coordinate or tetracoordinate. Almost all compounds of aluminium(III) are colorless.[21]

Halides

All four trihalides are well known. Unlike the structures of the three heavier trihalides, aluminium fluoride (AlF3) features six-coordinate Al. The octahedral coordination environment for AlF3 is related to the compactness of fluoride ion, six of which can fit around the small Al3+ center. AlF3 sublimes (with cracking) at 1,291 °C (2,356 °F). With heavier halides, the coordination numbers are lower. The other trihalides are dimeric or polymeric with tetrahedral Al centers. These materials are prepared by treating aluminium metal with the halogen, although other methods exist. Acidification of the oxides or hydroxides affords hydrates. In aqueous solution, the halides often form mixtures, generally containing six-coordinate Al centers, which are feature both halide and aquo ligands. When aluminium and fluoride are together in aqueous solution, they readily form complex ions such as [AlF(H
2
O)
5
]2+
, AlF
3
(H
2
O)
3
, and [AlF
6
]3−
. In the case of chloride, polyaluminium clusters are formed such as [Al13O4(OH)24(H2O)12]7+.

Oxide and hydroxides

Aluminium forms one stable oxide, known by its mineral name corundum. Sapphire and ruby are impure corundum contaminated with trace amounts of other metals. The two oxide-hydroxides, AlO(OH), are boehmite and diaspore. There are three trihydroxides: bayerite, gibbsite, and nordstrandite, which differ in their crystalline structure (polymorphs). Most are produced from ores by a variety of wet processes using acid and base. Heating the hydroxides leads to formation of corundum. These materials are of central importance to the production of aluminium and are themselves extremely useful.

Carbide, nitride, and related materials

Aluminium carbide (Al4C3) is made by heating a mixture of the elements above 1,000 °C (1,832 °F). The pale yellow crystals consist of tetrahedral aluminium centers. It reacts with water or dilute acids to give methane. The acetylide, Al2(C2)3, is made by passing acetylene over heated aluminium.

Aluminium nitride (AlN) is the only nitride known for aluminium. Unlike the oxides it features tetrahedral Al centers. It can be made from the elements at 800 °C (1,472 °F). It is air-stable material with a usefully high thermal conductivity. Aluminium phosphide (AlP) is made similarly, and hydrolyses to give phosphine:

AlP + 3 H2O → Al(OH)3 + PH3

Organoaluminium compounds and related hydrides

Structure of trimethylaluminium, a compound that features five-coordinate carbon.

A variety of compounds of empirical formula AlR3 and AlR1.5Cl1.5 exist.[41] These species usually feature tetrahedral Al centers, e.g. "triisobutylaluminium. Such compounds are widely used in industrial chemistry, despite the fact that they are often highly pyrophoric. Few analogues exist between organoaluminium and organoboron compounds except for large organic groups.

The important aluminium hydride is lithium hydride and aluminium trichloride:

4 LiH + AlCl3 → LiAlH4 + 3 LiCl

Several useful derivatives of LiAlH4 are known, e.g. sodium bis(2-methoxyethoxy)dihydridoaluminate. The simplest hydride, aluminium hydride or alane, remains a laboratory curiosity. It is a polymer with the formula (AlH3)n, in contrast to the corresponding boron hydride with the formula (BH3)2.

Oxidation states +1 and +2

Although the great majority of aluminium compounds feature Al3+ centers, compounds with lower oxidation states are known and sometime of significance as precursors to the Al3+ species.

Aluminium(I)

AlF, AlCl and AlBr exist in the gaseous phase when the trihalide is heated with aluminium. The composition AlI is unstable at room temperature with respect to the triiodide:[42]

3 AlI → AlI3 + 2 Al

A stable derivative of aluminium monoiodide is the cyclic adduct formed with triethylamine, Al4I4(NEt3)4. Also of theoretical interest but only of fleeting existence are Al2O and Al2S. Al2O is made by heating the normal oxide, Al2O3, with silicon at 1,800 °C (3,272 °F) in a vacuum.[42] Such materials quickly disproportionates to the starting materials.

Aluminium(II)

Very simple Al(II) compounds are invoked or observed in the reactions of Al metal with oxidants. For example, ligand.[45]

Analysis

The presence of aluminium can be detected in qualitative analysis using aluminon.

Applications

Etched surface from a high purity (99.9998%) aluminium bar, size 55×37 mm

General use

Aluminium is the most widely used non-ferrous metal.[46] Global production of aluminium in 2005 was 31.9 million tonnes. It exceeded that of any other metal except iron (837.5 million tonnes).[47] Forecast for 2012 is 42–45 million tonnes, driven by rising Chinese output.[48]

Aluminium is almost always alloyed, which markedly improves its mechanical properties, especially when tempered. For example, the common aluminium foils and beverage cans are alloys of 92% to 99% aluminium.[49] The main alloying agents are copper, zinc, magnesium, manganese, and silicon (e.g., duralumin) and the levels of these other metals are in the range of a few percent by weight.[50]

Household aluminium foil
Aluminium-bodied Austin "A40 Sports" (c. 1951)
Aluminium slabs being transported from a smelter

Some of the many uses for aluminium metal are in:

  • Transportation (automobiles, aircraft, trucks, railway cars, marine vessels, bicycles, spacecraft, etc.) as sheet, tube, castings, etc.
  • Packaging (cans, foil, frame of etc.)
  • Construction (windows, doors, siding, building wire, etc.).[51]
  • A wide range of household items, from cooking utensils to baseball bats, watches.[52]
  • Street lighting poles, sailing ship masts, walking poles, etc.
  • Outer shells of consumer electronics, also cases for equipment e.g. photographic equipment, MacBook Pro's casing
  • Electrical transmission lines for power distribution ("creep" and oxidation are not issues in this application as the terminations are usually multi-sided "crimps" which enclose all sides of the conductor with a gas-tight seal)
  • MKM steel and Alnico magnets
  • Super purity aluminium (SPA, 99.980% to 99.999% Al), used in electronics and CDs, and also in wires/cabling.
  • Heat sinks for electronic appliances such as transistors and CPUs.
  • Substrate material of metal-core copper clad laminates used in high brightness LED lighting.
  • Powdered aluminium is used in paint, and in pyrotechnics such as solid rocket fuels and thermite.
  • Aluminium reacts with hydrochloric acid or with sodium hydroxide to produce hydrogen gas.
  • Aluminium is used to make food containers, because of its resistance to corrosion.
  • Aluminium with magnesium [alloy] is used to make body of aircraft.
  • Aluminium with other metals, used to make railway tracks.
  • Aluminium is used to make cooking utensils, because it is resistant to corrosion, and light-weight.
  • A variety of countries, including France, Italy, Poland, Finland, Romania, Israel, and the former Yugoslavia, have issued coins struck in aluminium or aluminium-copper alloys.[53][54]
  • Some guitar models sport aluminium diamond plates on the surface of the instruments, usually either chrome or black. Kramer Guitars and Travis Bean are both known for having produced guitars with necks made of aluminium, which gives the instrument a very distinctive sound.

Aluminium is usually alloyed – it is used as pure metal only when corrosion resistance and/or workability is more important than strength or hardness. Aluminium-based alloys abruptly increase their strength characteristics with small additions of scandium, as well as zirconium and hafnium.[55] A thin layer of aluminium can be deposited onto a flat surface by physical vapor deposition or (very infrequently) chemical vapor deposition or other chemical means to form optical coatings and mirrors.

Aluminium compounds

Because aluminium is abundant and most of its derivatives exhibit low toxicity, the compounds of aluminium enjoy wide and sometimes large-scale applications.

Alumina

Aluminium oxide (Al2O3) and the associated oxy-hydroxides and trihydroxides are produced or extracted from minerals on a large scale. The great majority of this material is converted to metallic aluminium. In 2013 about 10% of the domestic shipments in the United States were used for other applications.[56] A major use is as an absorbent. For example, alumina removes water from hydrocarbons, which enables subsequent processes that are poisoned by moisture. Aluminium oxides are common catalysts for industrial processes, e.g. the Claus process for converting hydrogen sulfide to sulfur in refineries and for the alkylation of amines. Many industrial catalysts are "supported", meaning generally that an expensive catalyst (e.g., platinum) is dispersed over a high surface area material such as alumina. Being a very hard material (Mohs hardness 9), alumina is widely used as an abrasive and the production of applications that exploit its inertness, e.g., in high pressure sodium lamps.

Sulfates

Several sulfates of aluminium find applications. Aluminium sulfate (Al2(SO4)3·(H2O)18) is produced on the annual scale of several billions of kilograms. About half of the production is consumed in water treatment. The next major application is in the manufacture of paper. It is also used as a mordant, in fire extinguishers, as a food additive (E number E173), in fireproofing, and in leather tanning. Aluminium ammonium sulfate, which is also called ammonium alum, (NH4)Al(SO4)2·12H2O, is used as a mordant and in leather tanning.[57] Aluminium potassium sulfate ([Al(K)](SO4)2)·(H2O)12 is used similarly. The consumption of both alums is declining.

Chlorides

Aluminium chloride (AlCl3) is used in petroleum refining and in the production of synthetic rubber and polymers. Although it has a similar name, aluminium chlorohydrate has fewer and very different applications, e.g. as a hardening agent and an antiperspirant. It is an intermediate in the production of aluminium metal.

Niche compounds

The many aluminium compounds with niche applications include Lewis acids and cocatalysts. For example, methylaluminoxane is a cocatalyst for Ziegler-Natta olefin polymerization to produce vinyl polymers such as polyethene. Aqueous aluminium ions (such as found in aqueous aluminium sulfate) are used to treat against fish parasites such as Gyrodactylus salaris. In many vaccines, certain aluminium salts serve as an immune adjuvant (immune response booster) to allow the protein in the vaccine to achieve sufficient potency as an immune stimulant.

Aluminium alloys in structural applications

Aluminium alloys with a wide range of properties are used in engineering structures. Alloy systems are classified by a number system (ISO).

The strength and durability of aluminium alloys vary widely, not only as a result of the components of the specific alloy, but also as a result of heat treatments and manufacturing processes. A lack of knowledge of these aspects has from time to time led to improperly designed structures and gained aluminium a bad reputation.

One important structural limitation of aluminium alloys is their fatigue strength. Unlike steels, aluminium alloys have no well-defined fatigue limit, meaning that fatigue failure eventually occurs, under even very small cyclic loadings. This implies that engineers must assess these loads and design for a fixed life rather than an infinite life.

Another important property of aluminium alloys is their sensitivity to heat. Workshop procedures involving heating are complicated by the fact that aluminium, unlike steel, melts without first glowing red. Forming operations where a blow torch is used therefore require some expertise, since no visual signs reveal how close the material is to melting. Aluminium alloys, like all structural alloys, also are subject to internal stresses following heating operations such as welding and casting. The problem with aluminium alloys in this regard is their low melting point, which make them more susceptible to distortions from thermally induced stress relief. Controlled stress relief can be done during manufacturing by heat-treating the parts in an oven, followed by gradual cooling—in effect annealing the stresses.

The low melting point of aluminium alloys has not precluded their use in rocketry; even for use in constructing combustion chambers where gases can reach 3500 K. The Agena upper stage engine used a regeneratively cooled aluminium design for some parts of the nozzle, including the thermally critical throat region.

Another alloy of some value is aluminium bronze (Cu-Al alloy).

History

The statue of the Anteros in Piccadilly Circus, London, was made in 1893 and is one of the first statues cast in aluminium.

Ancient Greeks and Romans used aluminium salts as dyeing mordants and as astringents for dressing wounds; alum is still used as a styptic. In 1761, Guyton de Morveau suggested calling the base alum alumine. In 1808, Humphry Davy identified the existence of a metal base of alum, which he at first termed alumium and later aluminum (see etymology section, below).

The metal was first produced in 1825 in an impure form by Danish physicist and chemist Hans Christian Ørsted. He reacted anhydrous aluminium chloride with potassium amalgam, yielding a lump of metal looking similar to tin.[58] Friedrich Wöhler was aware of these experiments and cited them, but after redoing the experiments of Ørsted he concluded that this metal was pure potassium. He conducted a similar experiment in 1827 by mixing anhydrous aluminium chloride with potassium and yielded aluminium.[58] Wöhler is generally credited with isolating aluminium (Latin alumen, alum). Further, Pierre Berthier discovered aluminium in bauxite ore. Henri Etienne Sainte-Claire Deville improved Wöhler's method in 1846. As described in his 1859 book, aluminium trichloride could be reduced by sodium, which was more convenient and less expensive than potassium used by Wöhler.[59] In the mid-1880s, aluminium metal was exceedingly difficult to produce, which made pure aluminium more valuable than gold.[60] So celebrated was the metal that bars of aluminium were exhibited at the Exposition Universelle of 1855.[61] Napoleon III of France is reputed to have held a banquet where the most honored guests were given aluminium utensils, while the others made do with gold.[62][63]

Aluminium was selected as the material to use for the 100 ounces (2.8 kg) capstone of the Washington Monument in 1884, a time when one ounce (30 grams) cost the daily wage of a common worker on the project (in 1884 about $1 for 10 hours of labor; today, a construction worker in the US working on such a project might earn $25–$35 per hour and therefore around $300 in an equivalent single 10-hour day).[64] The capstone, which was set in place on 6 December 1884 in an elaborate dedication ceremony, was the largest single piece of aluminium cast at the time.[64]

The Cowles companies supplied aluminium alloy in quantity in the United States and England using smelters like the furnace of Carl Wilhelm Siemens by 1886.[65][66][67]

Hall-Heroult process: availability of cheap aluminium metal

Charles Martin Hall of Ohio in the U.S. and Paul Héroult of France independently developed the Hall-Héroult electrolytic process that facilitated large-scale production of metallic aluminium. This process remains in use today.[68] In 1888, with the financial backing of Alfred E. Hunt, the Pittsburgh Reduction Company started; today it is known as Alcoa. Héroult's process was in production by 1889 in Switzerland at Aluminium Industrie, now Alcan, and at British Aluminium, now Luxfer Group and Alcoa, by 1896 in Scotland.[69]

By 1895, the metal was being used as a building material as far away as Sydney, Australia in the dome of the Chief Secretary's Building.

With the explosive expansion of the airplane industry during World War I (1914-1917), major governments demanded large shipments of aluminium for light, strong airframes. They often subsidized factories and the necessary electrical supply systems.[70]

Many navies have used an aluminium superstructure for their vessels; the 1975 fire aboard USS Belknap that gutted her aluminium superstructure, as well as observation of battle damage to British ships during the Falklands War, led to many navies switching to all steel superstructures.

Aluminium wire was once widely used for domestic electrical wiring (feeders and branch circuits). Owing to "creep" and corrosion-induced failures, a number of fires resulted. However, aluminum is still employed for services, where special terminations are provided.

Etymology

The various names all derive from its status as a base of alum. It is borrowed from Old French; its ultimate source, alumen, in turn is a Latin word that literally means "bitter salt".[71]

Two variants of the metal's name are in current use, aluminium (pronunciation: ) and aluminum ()—besides the obsolete alumium. The International Union of Pure and Applied Chemistry (IUPAC) adopted aluminium as the standard international name for the element in 1990 but, three years later, recognized aluminum as an acceptable variant. Hence their periodic table includes both.[72] IUPAC internal publications use either spelling in nearly the same number.[73]

Different endings

Most countries use the ending "-ium" for "aluminium". In the United States and Canada, the ending "-um" predominates.[21][74] The Canadian Oxford Dictionary prefers aluminum, whereas the Australian Macquarie Dictionary prefers aluminium. In 1926, the American Chemical Society officially decided to use aluminum in its publications; American dictionaries typically label the spelling aluminium as "chiefly British".[75][76] The earliest citation given in the Oxford English Dictionary for any word used as a name for this element is alumium, which British chemist and inventor Humphry Davy employed in 1808 for the metal he was trying to isolate electrolytically from the mineral alumina. The citation is from the journal Philosophical Transactions of the Royal Society of London: "Had I been so fortunate as to have obtained more certain evidences on this subject, and to have procured the metallic substances I was in search of, I should have proposed for them the names of silicium, alumium, zirconium, and glucium."[77][78]

Davy settled on aluminum by the time he published his 1812 book Chemical Philosophy: "This substance appears to contain a peculiar metal, but as yet Aluminum has not been obtained in a perfectly free state, though alloys of it with other metalline substances have been procured sufficiently distinct to indicate the probable nature of alumina."[79] But the same year, an anonymous contributor to the Quarterly Review, a British political-literary journal, in a review of Davy's book, objected to aluminum and proposed the name aluminium, "for so we shall take the liberty of writing the word, in preference to aluminum, which has a less classical sound."[80]

The -ium suffix conformed to the precedent set in other newly discovered elements of the time: potassium, sodium, magnesium, calcium, and strontium (all of which Davy isolated himself). Nevertheless, -um spellings for elements were not unknown at the time, as for example platinum, known to Europeans since the 16th century, molybdenum, discovered in 1778, and tantalum, discovered in 1802. The -um suffix is consistent with the universal spelling alumina for the oxide (as opposed to aluminia), as lanthana is the oxide of lanthanum, and magnesia, ceria, and thoria are the oxides of magnesium, cerium, and thorium respectively.

The aluminum spelling is used in the Webster's Dictionary of 1828. In his advertising handbill for his new electrolytic method of producing the metal in 1892, Charles Martin Hall used the -um spelling, despite his constant use of the -ium spelling in all the patents[68] he filed between 1886 and 1903. Hall's domination of production of the metal ensured that aluminum became the standard English spelling in North America.

Biology

Schematic of Al absorption by human skin.[81]
There are five major Al forms absorbed by human body: the free solvated trivalent cation (Al3+(aq)); low-molecular-weight, neutral, soluble complexes (LMW-Al0(aq)); high-molecular-weight, neutral, soluble complexes (HMW-Al0(aq)); low-molecular-weight, charged, soluble complexes (LMW-Al(L)n+/−(aq)); nano and micro-particulates (Al(L)n(s)). They are transported across cell membranes or cell epi-/endothelia through five major routes: (1) paracellular; (2) transcellular; (3) active transport; (4) channels; (5) adsorptive or receptor-mediated endocytosis.[81]

Despite its widespread occurrence in nature, aluminium has no known function in biology. Aluminium salts are remarkably nontoxic, aluminium sulfate having an LD50 of 6207 mg/kg (oral, mouse), which corresponds to 500 grams for an 80 kg (180 lb) person.[8] The extremely low acute toxicity notwithstanding, the health effects of aluminium are of interest in view of the widespread occurrence of the element in the environment and in commerce.

Health concerns

Some toxicity can be traced to deposition in bone and the central nervous system, which is particularly increased in patients with reduced renal function. Because aluminium competes with calcium for absorption, increased amounts of dietary aluminium may contribute to the reduced skeletal mineralization (osteopenia) observed in preterm infants and infants with growth retardation. In very high doses, aluminium is associated with altered function of the blood–brain barrier.[82] A small percentage of people are allergic to aluminium and experience contact dermatitis, digestive disorders, vomiting or other symptoms upon contact or ingestion of products containing aluminium, such as antiperspirants and antacids. In those without allergies, aluminium is not as toxic as heavy metals, but there is evidence of some toxicity if it is consumed in amounts greater than 40 mg/day per kg of body mass.[83] Although the use of aluminium cookware has not been shown to lead to aluminium toxicity in general, excessive consumption of antacids containing aluminium compounds and excessive use of aluminium-containing antiperspirants provide more significant exposure levels. Studies have shown that consumption of acidic foods or liquids with aluminium significantly increases aluminium absorption,[84] and maltol has been shown to increase the accumulation of aluminium in nervous and osseous tissue.[85] Furthermore, aluminium increases estrogen-related gene expression in human breast cancer cells cultured in the laboratory.[86] The estrogen-like effects of these salts have led to their classification as a metalloestrogen.

The effects of aluminium in antiperspirants have been examined over the course of decades with little evidence of skin irritation.[8] Nonetheless, its occurrence in antiperspirants, dyes (such as aluminium lake), and food additives has caused concern.[87] Although there is little evidence that normal exposure to aluminium presents a risk to healthy adults,[88] some studies point to risks associated with increased exposure to the metal.[87] Aluminium in food may be absorbed more than aluminium from water.[89] It is classified as a non-carcinogen by the US Department of Health and Human Services.[83]

In case of suspected sudden intake of a large amount of aluminium, deferoxamine mesylate may be given to help eliminate it from the body by chelation.[90]

Occupational safety

Exposure to powdered aluminium or aluminium welding fumes can cause pulmonary fibrosis. The United States Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit of 15 mg/m3 time weighted average (TWA) for total exposure and 5 mg/m3 TWA for respiratory exposure. The US National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit is the same for respiratory exposure but is 10 mg/m3 for total exposure, and 5 mg/m3 for fumes and powder. Fine aluminium powder can ignite or explode, posing another workplace hazard.[91][92]

Alzheimer's disease

Aluminium has controversially been implicated as a factor in Alzheimer's disease.[93] According to the Alzheimer's Society, the medical and scientific opinion is that studies have not convincingly demonstrated a causal relationship between aluminium and Alzheimer's disease.[94] Nevertheless, some studies, such as those on the PAQUID cohort,[95] cite aluminium exposure as a risk factor for Alzheimer's disease. Some brain plaques have been found to contain increased levels of the metal.[96] Research in this area has been inconclusive; aluminium accumulation may be a consequence of the disease rather than a causal agent.[97][98]

Effect on plants

Aluminium is primary among the factors that reduce plant growth on acid soils. Although it is generally harmless to plant growth in pH-neutral soils, the concentration in acid soils of toxic Al3+ cations increases and disturbs root growth and function.[99][100][101][102]

Most acid soils are saturated with aluminium rather than hydrogen ions. The acidity of the soil is therefore a result of hydrolysis of aluminium compounds.[103] This concept of "corrected lime potential"[104] to define the degree of base saturation in soils became the basis for procedures now used in soil testing laboratories to determine the "lime requirement"[105] of soils.[106]

  • Aluminium at The Periodic Table of Videos (University of Nottingham)
  • CDC - NIOSH Pocket Guide to Chemical Hazards - Aluminum
  • Electrolytic production
  • World production of primary aluminium, by country
  • Price history of aluminum, according to the IMF
  • History of Aluminium – from the website of the International Aluminium Institute
  • Emedicine – Aluminium
  • The short film ALUMINUM (1941) is available for free download at the Internet Archive

External links

  1. ^ Standard Atomic Weights 2013. Commission on Isotopic Abundances and Atomic Weights
  2. ^ Aluminium monoxide
  3. ^ Aluminium iodide
  4. ^
  5. ^ a b
  6. ^
  7. ^
  8. ^ a b c d e
  9. ^ a b
  10. ^
  11. ^
  12. ^
  13. ^
  14. ^
  15. ^
  16. ^
  17. ^
  18. ^
  19. ^ http://periodictable.com/Properties/A/UniverseAbundance.v.log.html
  20. ^ http://periodictable.com/Properties/A/UniverseAbundance.v.log.html
  21. ^ a b c
  22. ^
  23. ^ a b
  24. ^
  25. ^
  26. ^ a b
  27. ^
  28. ^
  29. ^
  30. ^ a b
  31. ^
  32. ^
  33. ^
  34. ^
  35. ^
  36. ^
  37. ^
  38. ^
  39. ^
  40. ^
  41. ^
  42. ^ a b
  43. ^
  44. ^
  45. ^
  46. ^
  47. ^
  48. ^
  49. ^
  50. ^
  51. ^
  52. ^
  53. ^
  54. ^
  55. ^
  56. ^
  57. ^
  58. ^ a b
  59. ^
  60. ^
  61. ^
  62. ^
  63. ^
  64. ^ a b
  65. ^
  66. ^
  67. ^
  68. ^ a b US patent 400664, Charles Martin Hall, "Process of Reducing Aluminium from its Fluoride Salts by Electrolysis", issued 1889-04-02 
  69. ^
  70. ^ Mats Ingulstad, "‘We Want Aluminum, No Excuses’: Business-Government Relations in the American Aluminum Industry, 1917–1957," in From Warfare to Welfare: Business-Government Relations in the Aluminium Industry, ed. Mats Ingulstad and Hans Otto Frøland, 33–68. (Oslo: Tapir Academic Press, 2012.)
  71. ^
  72. ^ IUPAC Periodic Table of the Elements. iupac.org
  73. ^ IUPAC Web site publication search for 'aluminum'.
  74. ^ Bremner, John Words on Words: A Dictionary for Writers and Others Who Care about Words, pp. 22–23. ISBN 0-231-04493-3.
  75. ^
  76. ^
  77. ^ "alumium", Oxford English Dictionary. Ed. J.A. Simpson and E.S.C. Weiner, second edition Oxford: Clarendon Press, 1989. OED Online Oxford University Press. Accessed 29 October 2006. Citation is listed as "1808 SIR H. DAVY in Phil. Trans. XCVIII. 353". The ellipsis in the quotation is as it appears in the OED citation.
  78. ^
  79. ^
  80. ^
  81. ^ a b
  82. ^
  83. ^ a b
  84. ^
  85. ^
  86. ^
  87. ^ a b
  88. ^ Gitelman, H. J. "Physiology of Aluminum in Man", in Aluminum and Health, CRC Press, 1988, ISBN 0-8247-8026-4, p. 90
  89. ^
  90. ^ Aluminum Toxicity from NYU Langone Medical Center. Last reviewed November 2012 by Igor Puzanov, MD
  91. ^
  92. ^
  93. ^
  94. ^ Aluminium and Alzheimer's disease, The Alzheimer's Society. Retrieved 30 January 2009.
  95. ^
  96. ^
  97. ^
  98. ^
  99. ^
  100. ^
  101. ^
  102. ^
  103. ^
  104. ^
  105. ^
  106. ^ Applying lime to soils reduces the Aluminum toxicity to plants.
  107. ^
  108. ^
  109. ^
  110. ^
  111. ^

References

See also

A Spanish scientific report from 2001 claimed that the fungus Geotrichum candidum consumes the aluminium in compact discs.[108][109] However, other reports on it always refer back to the 2001 Spanish report and there is no supporting original research since that report. Better documented, the bacterium Pseudomonas aeruginosa and the fungus Cladosporium resinae are commonly detected in aircraft fuel tanks using kerosene-based fuels (not AV gas), and can degrade aluminium in cultures.[110] However, this is not a matter of the bacteria or fungi directly attacking or consuming the aluminium, but rather a result of the microbes' waste having a corrosive nature.[111]

Biodegradation

This is not the case in all plants. [107]