- Etymology 1
Golf tee 2
- History 2.1
- Tee Ball tee 3
- Kicking tee 4
- See also 5
- References 6
- External links 7
The word tee is derived from the Scottish Gaelic word tigh meaning house and is related to the 'house' (the coloured circles) in curling. This would make sense, as the first golf tees were within a circle of one golf club length round the hole. Nowadays, modern courses have separate, designated tee boxes for each hole. For example, the ninth hole of a course is played from the ninth tee to the ninth green, and similarly for the other holes.
In golf, a tee is normally used for the first stroke of each hole. The area from which this first stroke is hit is in the rules known as the teeing ground. Normally, teeing the ball is allowed only on the first shot of a hole, called the tee shot, and is illegal for any other shot; however, local or seasonal rules may allow or require teeing for other shots as well, e.g., under "winter rules" to protect the turf when it is unusually vulnerable. Teeing gives a considerable advantage for drive shots, so it is normally done whenever allowed. However, a player may elect to play his/her tee shot without a tee. This typically gives the shot a lower trajectory.
A standard golf tee is 2.125" (two and one eighth inches = 5.4 cm) long, but both longer and shorter tees are permitted. Ordinary tees can be made from wood or from durable plastic. There are also many biodegradable, ecological and recycable golf tees that diminish the number trees cut down to manufacture the tees and allow golf courses to lower costs by not having to deal with the broken wooden tees on their courses.
According to the R&A rule book, for a tee to be legal, "It must not be longer than 4 inches (101.6 mm) and it must not be designed or manufactured in such a way that it could indicate the line of play or influence the movement of the ball."
The development of the tee was the last major change to the rules of golf. Before this, golf balls were teed up on little heaps of sand that were provided in boxes. This explains the historical name tee boxes for what is today known as teeing ground.
The earliest golf tees rested flat on the ground and had a raised portion to prop up the ball. The first  This tee consisted of a wood cone with a rubber sleeve to support the ball, but it is not known to have ever been marketed.
These and other variations failed to catch on, as most golfers—whether because of tradition, habit, or concerns about the rules—continued using heaps of sand. It took a strong marketing effort by Dr. William Lowell, Sr. in the 1920s to bring manufactured tees into widespread use. Sales of his "Reddy Tee," a simple wooden peg with a flared top, took off after Lowell hired professional golfers Walter Hagen and Joe Kirkwood, Sr. to promote the product during exhibition matches. It was copied around the world, and remains the most common type of golf tee.
Tee Ball tee
Tee Ball is based on baseball, with the main difference being the use of a tee in the place of a pitcher. Much larger than a golf tee, the Tee Ball tee is a rubber stand attached to the home plate which supports the baseball at a suitable height for the batter to hit. It is adjustable to allow for variations in batter height.
A kicking tee is a rubber or plastic platform, often with prongs and/or a brim around an inner depression.
In American football and its variants, a tee may be used on kickoffs to raise the ball slightly above the playing surface (up to one inch, by NFL and NCAA rules). First use of the tee is attributed to Arda Bowser, a member of the Canton Bulldogs NFL championship team of 1922. The CFL and some high school leagues also allow the use of tees on field goal and extra point kicks, where another player (the holder) places one end of the ball on the tee (usually just a rubber block) and holds the opposite end.
- R&A Rules of Golf: Appendix IV, Rule 11. Retrieved on 2012-08-14
- Valenta, Irwin R. The Singular History of the Golf Tee, Greensboro, North Carolina, 1995. Summary at 
- George Grant - Improved Golf Tee, Mary Bellis, inventors.about.com.
- Hyman, Vicki. "A look at the man who invented modern golf tees". July 31, 2010. The Star-Ledger. Retrieved May 23, 2014.
- Golf TeeDerivation of
- U.S. Patent 638920