Launch Control Center
Launch Control Center
LC-39 Launch Control Center
|Nearest city||Titusville, Florida|
|MPS||John F. Kennedy Space Center MPS|
|NRHP Reference #||99001645|
|Added to NRHP||January 21, 2000|
The Launch Control Center (LCC) is a four-story building located at NASA's Kennedy Space Center on Merritt Island, Florida used for the supervision of launches from Launch Complex 39. In practice, this means that the LCC handles all American manned space flights. Attached to the southeast corner of the Vehicle Assembly Building, the LCC contains offices; telemetry, tracking and instrumentation equipment; the automated Launch Processing System; and four firing rooms.
- Firing room 1
Key personnel 2
- Launch Director (LD) 2.1
- Flow Director (FD) 2.2
- NASA Test Director (NTD) 2.3
- Orbiter Test Conductor (OTC) 2.4
- Tank/Booster Test Conductor (TBC) 2.5
- Payload Test Conductor (PTC) 2.6
- Launch Processing System Coordinator (LPS) 2.7
- Support Test Manager (STM) 2.8
- Safety Console Coordinator (SAFETY) 2.9
- Shuttle Project Engineer (SPE) 2.10
- Landing and Recovery Director (LRD) 2.11
- Superintendent of Range Operations (SRO) 2.12
- Ground Launch Sequencer Engineer (CGLS) 2.13
- See also 3
- Sources 4.1
- External links 5
Launch operations are supervised and controlled from the firing room. Responsibility for the booster and spacecraft remains with the LCC until the booster has cleared the launch tower, when responsibility is handed over to the Mission Control Center at Johnson Space Center.
Extensive renovation of Firing Room 4 was finished in 2006.
Launch Director (LD)
The Launch Director is the head of the launch team, and is responsible for making the final "go" or "no go" decision for launch after polling the relevant team members.
Flow Director (FD)
The Flow Director is responsible for the preparation of the spacecraft for launch, and remains in the LCC in an advisory capacity.
NASA Test Director (NTD)
The NASA Test Director is responsible for all pre-launch testing, whether involving the flight crew, the orbiter, the external tank/solid rocket booster, or ground support equipment. The NTD is also responsible for the safety of all personnel on the pad after fuelling has occurred. Reports to the Launch Director.
Orbiter Test Conductor (OTC)
The Orbiter Test Conductor is in charge of all pre-flight checkout and testing of the orbiter, and manages the engineers in the firing room who monitor the orbiter's systems. OTC is an employee of a contractor rather than of NASA.
Tank/Booster Test Conductor (TBC)
Payload Test Conductor (PTC)
The Payload Test Conductor is responsible for the pre-flight test and checkout of payloads carried by the orbiter and manages the engineering and test teams responsible for monitoring and controlling payload ground operations. PTC is a contractor member of the Space Shuttle Team.
Launch Processing System Coordinator (LPS)
The LPS Coordinator monitors and oversees the LPS System; specifically, the desired launch rate, Space Shuttle stacking (assembly), and all safety requirements. This is made possible by the Launch Processing System, or LPS — a highly automated, computer-controlled system that oversees the entire checkout and launch process.
Support Test Manager (STM)
Safety Console Coordinator (SAFETY)
Shuttle Project Engineer (SPE)
Landing and Recovery Director (LRD)
Superintendent of Range Operations (SRO)
The Superintendent of Range Operations ensures that all tracking and communications systems are ready to support the launch operation as well as ensuring that downrange airspace and splashdown areas remain clear for launch, and monitors weather near the launch site.
Ground Launch Sequencer Engineer (CGLS)
The Ground Launch Sequencer Engineer is responsible for monitoring the operation of the automated Ground Launch Sequencer system, which controls the countdown from T-9 minutes until launch. After this point through to T-31 seconds, they are in charge of implementing a manual hold if necessary. After T-31 seconds however only cutoff is available and will result in a recycle of the countdown to T-20 minutes and a scrub of the launch. The request for a cutoff is phrased "CGLS, give cutoff."
- "National Register Information System". National Register of Historic Places.
- KSC Launch Control CenterNASA:
- Launch Control Center
- Launch Control Center Main page.
- Launch Team
- Firing Room Tour
- New Launch Control Room Ready for STS-121 Liftoff
- KSC Launch Processing System