Inertial fusion power plant

Inertial fusion power plant

An inertial fusion power plant is intended to produce electric power by use of inertial confinement fusion techniques on an industrial scale. This type of power plant is still in a research phase.

Two established options for possible medium-term implementation of fusion energy production are magnetic confinement - being used in the ITER international project - and laser-based inertial confinement, as used in the French Laser Mégajoule and in the United States NIF. Inertial confinement fusion (ICF), including heavy-ion inertial fusion (HIF) has been proposed as a possible additional means of implementing a fusion power plant.


  • Overall principles of an Inertial Fusion Energy (IFE) reactor 1
  • IFE projects 2
  • See also 3
  • Notes and references 4
  • External links 5
    • IFE general information 5.1
    • Inertial fusion experimentation sites 5.2
    • IFE projects 5.3

Overall principles of an Inertial Fusion Energy (IFE) reactor

The operation of an IFE reactor is in some ways analogous to the operation of the four stroke cycle of a petrol engine:

  • intake of the fusion fuel (microcapsule) into the reactor chamber;
  • compression of the microcapsule in order to initiate the fusion reactions;
  • explosion of the plasma created during the compression stroke, leading to the release of fusion energy;
  • exhaust of the reaction residue, which will be treated afterwards to extract all the reusable elements, mainly tritium.

To allow such an operation, an inertial fusion reactor is made of several subsets:

Mockup of a golden hohlraum used in laser inertial confinement.
  • the injection system, which delivers to the reaction chamber the fusion fuel capsules, and at the same time the possible devices necessary to initiate fusion:
    • the container (hohlraum), intended to take the fuel capsule to a uniform very high temperature, mainly for laser and ion beam confinement techniques;
    • the "wires array" and its power transmission line, for z-pinch confinement technique;
  • the "driver" used to compress the fusion fuel capsules which, depending on the technique, can be lasers, an ion beam accelerator or a z-pinch device;
  • the reaction chamber, built upon an external wall made of metal, or an internal blanket intended to protect the external wall from the fusion shockwave and radiation, to get the emitted energy, and to produce the tritium fuel;
  • the system intended to process reaction products and debris.

IFE projects

Several projects of inertial fusion power plants have been proposed, including power production plans based on the following experimental devices, either in operation or under construction:

Only the US and French projects are based on z-pinch confinement; others are based on laser confinement techniques.

In the magnetic confinement field, the 2nd phase corresponds to the objectives of ITER, the 3rd to these of its follower DEMO, in 20 to 30 years, and the 4th to those of a possible PROTO, in 40 to 50 years. The various phases of such a project are the following:

  • Burning demonstration: reproducible achievement of energy release
  • High gain demonstration: experimental demonstration of the feasibility of a reactor with a sufficient energy gain
  • Industrial demonstration: validation of the various technical options, and of the whole data needed to define a commercial reactor
  • Commercial demonstration: demonstration of the reactor ability to work over a long period, while maintaining the requirements for safety, liability and cost.

As of June 2006, Megajoule and NIF lasers were not yet in complete service. Inertial confinement and laser confinement fusion experiments had not gone beyond the first phase. Around 2010, NIF and Megajoule were planned for completion.

Livermore's IFE (LIFE) project was cancelled in January 2014.[1]

See also

Notes and references

  1. ^ Seife, Charles (October 16, 2014). "Fusion Energy’s Dreamers, Hucksters, and Loons: Bottling up the power of the sun will always be 20 years away". Slate. 

External links

IFE general information

  • La fusion thermonucléaire par confinement inertiel : de la recherche fondamentale à la production d'énergie PDF (1.28 MiB) (Université Bordeaux I, November 2005) (French)
  • Tutorial on Heavy-Ion Fusion Energy (Virtual National Laboratory for Heavy-Ion Fusion)
  • Summary Report of the 2nd Research Coordination Meeting on the Element of Inertial Fusion Energy Power Plants PDF (4.82 MiB) (November 2003)
  • Review of the Inertial Fusion Energy Program PDF (4.14 MiB) (Fusion Energy Sciences Advisory Committee, March 2004)
  • Overview of fusion nuclear technology in the US PDF (513 KiB) (June 2005)
  • Views on neutronics and activation issues facing liquid-protected IFE chambers
  • IEEE-USA Position : Fusion Energy Research & Development (June 2006)

Inertial fusion experimentation sites

  • Laser Mégajoule (French)
  • National Ignition Facility
  • Z-Machine

IFE projects

  • Analyses in Support of Z-IFE: LLNL Progress Report for FY-04
  • Nineteen Labs, Universities and Industries Collaborating To Produce Energy From ‘Z-Pinch’ Inertial Confinement Fusion
  • Z-Pinch Inertial Fusion Energy (presentation of the Sandia National Laboratories Z-IFE project, October 2005)
  • Progress on Z-Pinch Inertial Fusion Energy
  • Development path for Z-pinch IFE (collective work, April 2005)
  • Design Study and Technology Assessment on Inertial Fusion Energy Power Plant (Institute of Laser Engineering, Osaka University)
  • The High Average Power Laser Program
  • Developing the basis for target injection and tracking in Inertial Fusion Energy power plants (July 2000)