The Commodore 1530 (C2N) Datasette (a portmanteau of data and cassette), was Commodore's dedicated magnetic tape data storage device. Using Compact Cassettes as the storage medium, it provided inexpensive storage to Commodore's 8-bit home/personal computers, notably the PET, VIC-20, and C64. A physically similar model Commodore 1531 was made for the Commodore 16 and Plus/4 series computers.
Description and history
Datasette sound sample
Commodore Datasette 15-second sound sample
|Problems playing this file? See media help.|
The Datasette contained built-in analog to digital converters and audio filters to convert the computer's digital information into analog sound and vice versa (much like a modem does over a telephone line). Connection to the computer was done via a proprietary edge connector (Commodore 1530) or mini-DIN connector (Commodore 1531). The absence of recordable audio signals on this interface made the Datasette and its few clones the only cassette recorders usable with CBM's machines, until aftermarket converters made the use of ordinary recorders possible.
The Datasette was more popular outside than inside the United States. U.S. Gold, which imported American computer games to Britain, often had to wait until they were converted from disk because most British Commodore 64 owners used tape. Computer Gaming World reported in 1986 that British cassette-based software had failed in the United States because "97% of the Commodore systems in the USA have disk drives"; by contrast, MicroProse reported in 1987 that 80% of its 100,000 sales of Gunship in the UK were on cassette. In the United States disk drives quickly became standard, despite the Commodore 1541 floppy drive costing roughly five times as much as a Datasette. In most parts of Europe, the Datasette was the medium of choice for several years after its launch, although floppy disk drives were generally available. The inexpensive and widely available audio cassettes made the Datasette a good choice for the budget-aware home computer mass market.
The Datasette was very slow albeit extremely reliable, transferring data at around 50 bytes per second; even the very slow 1541 was significantly faster. Some years after the Datasette's launch, however, special turbo tape software appeared, providing much faster tape operation (loading and saving). Such software was integrated into most commercial prerecorded applications (mostly games), as well as being available separately for loading and saving the users' homemade programs and data. These programs were only widely used in Europe, as the US market had long since moved onto disks.
Datasettes could typically store about 100 kByte per 30 minute side. The use of turbo tape and other fast loaders increased this number to roughly 1000 kByte.
The Datasette has only one connection cable with a PCB edge connector at the computer end. All input/output signals to the datasette are all digital and so all digital to analog and vice versa is handled within the unit. Power is also included in this cable. The pinout is ground, +5 V DC, motor, read, write, key-sense. The sense signal monitors the play, rewind, and fast-forward buttons, but cannot differentiate between them. A mechanical interlock prevented any two of them being pressed at the same time. Unregulated 6.36 V DC is used to power the cassette motor.
To record physical data, the zero-crossing from positive to negative voltage of the analog signal is measured. The resulting time between these positive to negative crossings is then compared to a threshold to determine whether the time since the last crossing is short (0) or long (1). Note the lower amplitude for the shorter periods.
A circuit in the tape unit transforms the analog signal into a logical one or zero, which is then transmitted to the computer via the tape connector. Inside the computer, the first Complex Interface Adapter (6526) in the C64 senses when the signal goes from one to zero. This event is called trigger and causes an interrupt request. This event can be handled by a handler code, or simply discovered by testing bit 4 of location $DC0D. The points that trigger this event are indicated by the black circles in the figure.
Inside the tape device the read head signal is fed into an operational amplifier (1) whose output signal is DC-filtered. Op-amp (2) amplifies and feeds an RC-filter. Op-amp (3) amplifies the signal again followed by another DC-filter. Op-amp (4) amplifies the signal into clipping the sine formed signal. The positive and negative rails for all op-amps are wired to +5V DC and GND. The clipped signal therefore fits into the TTL electrical level window of the schmitt trigger step that in turn feeds the digital cassette port.
On the PAL version of the C64, the time granularity is 1.014 µs (for NTSC 0.978 µs). For a 300 bit/s data rate, equivalent to about 3333 µs/bit, this means each data bit takes 3284 clock cycles.
Once the bits can be decoded, they are fed into a shift register and are continuously compared to a special bit sequence. This bit sequence can also be seen as a byte. A bit-sequence match means that the stream is byte-synchronized. The first byte to compare with is called lead-in byte. If matched, it's compared to the sync byte as well.
An example: Turbo Tape 64 has a lead-in byte $02 (binary 00000010), sync byte $09 (binary 00001001) and a following sync sequence of $08, $07, $06, $05, $03, $02, $01.
Used with the PET, VIC-20, C64/128
There are at least four main models of the 1530/C2N Datassette:
- The built-in Datassette in the original PET 2001: black cassette lid, five white keys, no tape counter, no SAVE LED
- Black body original shape model, black cassette lid, five black keys, no tape counter, no SAVE LED
- White body original shape model, black cassette lid, five black keys, with tape counter, no SAVE LED
- White body new shape model, silver cassette lid, six black keys, with tape counter and a red SAVE LED
The first two external models were made as PET peripherals, and styled after the PET 2001 built-in tape drive. The latter two were styled and marketed for the VIC-20 and C64. All 1530s were compatible with all those computers, as well as the C128.
In addition to this, some models came with a small hole above the keys, to allow access to the adjustment screw of the tape head azimuth position. A small screwdriver could thus easily be used to effect the adjustment without disassembling the Datassette's chassis.
Confusingly, the Datassette at various times was sold both as the C2N DATASETTE UNIT Model 1530 and as the 1530 DATASSETTE UNIT Model C2N. Note the difference in spelling (one S versus two) used on the original product packaging.
Used with the C16/116 and Plus/4
Similar in physical appearance to the 1530/C2N models is the Commodore 1531, made for the Commodore 16 and Plus/4 series computers. This had a Mini-DIN connector in place of the PCB edge connector. This could be used with a C64/128 via an adaptor, which was supplied by Commodore with some units.
- Black/Charcoal body new shape model, silver cassette lid, six light gray keys, with tape counter and a red SAVE LED
The second, most common version of the 1530 C2N Datassette
One of the few clones
- Similar Commodore tape drives
- Datasette photos
- Description of tape format with conversion utilities and code
- C2N232 project to build a hardware adaptor/software program to archive Commodore Datasette files to a modern computer.
- DC2N Homepage Digital C2N replacement project.
- Sketchup model of the Commodore Datasette 1530. Sketchup model of the Commodore Datasette 1530.