A catastrophic failure is a sudden and total failure from which recovery is impossible. Catastrophic failures often lead to cascading systems failure. The term is most commonly used for structural failures, but has often been extended to many other disciplines where total and irrecoverable loss occurs. Such failures are investigated using the methods of forensic engineering, which aims to isolate the cause or causes of failure.
Catastrophic failure is also observed in the steam turbine rotor occurring due to peak stress acting on the rotor and also the stress concentration increases which ultimately leads to the failure of the disc.
In firearms, catastrophic failure usually refers to a rupture or disintegration of the barrel or receiver of the gun when firing it. Some possible causes for this is the gun being out of battery, having improper headspace, using incorrect ammunition for the firearm, using ammunition with an incorrect propellant charge, an obstructed or partially obstructed barrel, or weakened metal in the barrel or receiver. A failure of this type, also known colloquially as a "kaboom", or "kB" failure, can pose a threat to the user and bystanders.
In chemical engineering, thermal runaway can cause catastrophic failure.
Examples of catastrophic failure of engineered structures include:
- The Tay Rail Bridge disaster of 1879, where the center half mile of the bridge was completely destroyed while a train was crossing in a storm. The bridge was badly designed and its replacement was built as a separate structure upstream of the old.
- The failure of the South Fork Dam in 1889 released 4.8 billion US gallons (18 billion litres) of water and killed over 2,200 people (popularly known as the Johnstown Flood).
- The collapse of the St. Francis Dam in 1928 released 12.4 billion US gallons (47 billion litres) of water, resulting in a death toll of nearly 600 people.
- The collapse of the first Tacoma Narrows Bridge of 1940, where the main deck of the road bridge was totally destroyed by dynamic oscillations in a 40 miles per hour (64 km/h) wind.
- The De Havilland Comet disasters of 1954, later determined to be structural failures due to metal fatigue that had not been anticipated at the corners of square windows used by the Comet 1.
- The 62 Banqiao Dams failure event in China in 1975, due to Typhoon Nina. Approximately 86,000 people died from flooding and another 145,000 died from subsequent diseases, total of 231,000 deaths.
- The Hyatt Regency walkway collapse of 1981, where a suspended walkway in a hotel lobby in Kansas City, Missouri, collapsed completely, killing over 100 people on and below the structure.
- The Space Shuttle Challenger of 1986, in which an O-ring of a rocket booster failed; the entire crew and vehicle were lost.
- The nuclear reactor at the Chernobyl power plant, which exploded in 1986 causing the release of a substantial amount of radioactive materials.
- The collapse of the Warsaw radio mast of 1991, which had up to that point held the title of world's tallest structure.
- The Sampoong Department Store collapse of 1995, which happened due to structural weaknesses, killed 502 people and injured 937.
- The terrorist attacks and subsequent fire at the World Trade Center on September 11, 2001, weakened the floor joists to the point of catastrophic failure.
- The Space Shuttle Columbia of 2003, where damage to a wing during launch resulted in total loss upon re-entry.
- The collapse of the multi-span I-35W Mississippi River bridge on August 1, 2007.
- List of bridge disasters
- Seismic performance
- Structural collapse
- Structural failure
- Resonance disaster
- Risks to civilization, humans and planet Earth