Per the International Technology Roadmap for Semiconductors, the 45 nanometer (45 nm) technology node should refer to the average half-pitch of a memory cell manufactured at around the 2007–2008 time frame.
Matsushita and Intel started mass-producing 45 nm chips in late 2007, and AMD started production of 45 nm chips in late 2008, while IBM, Infineon, Samsung, and Chartered Semiconductor have already completed a common 45 nm process platform. At the end of 2008, SMIC was the first China-based semiconductor company to move to 45 nm, having licensed the bulk 45 nm process from IBM.
Many critical feature sizes are smaller than the wavelength of light used for lithography (i.e., 193 nm and 248 nm). A variety of techniques, such as larger lenses, are used to make sub-wavelength features. Double patterning has also been introduced to assist in shrinking distances between features, especially if dry lithography is used. It is expected that more layers will be patterned with 193 nm wavelength at the 45 nm node. Moving previously loose layers (such as Metal 4 and Metal 5) from 248 nm to 193 nm wavelength is expected to continue, which will likely further drive costs upward, due to difficulties with 193 nm photoresists.
- High-k dielectrics 1
- Technology demos 2
- Commercial introduction 3
- Example: Intel's 45 nm process 4
- Processors using 45 nm technology 5
- References 6
- External links 7
Chipmakers have initially voiced concerns about introducing new high-k materials into the gate stack, for the purpose of reducing leakage current density. As of 2007, however, both IBM and Intel have announced that they have high-k dielectric and metal gate solutions, which Intel considers to be a fundamental change in transistor design. NEC has also put high-k materials into production.
- In 2004, TSMC demonstrated a 0.296 square micrometer 45 nm SRAM cell. In 2008, TSMC moved on to a 40 nm process.
- In January 2006, Intel demonstrated a 0.346 square micrometers 45 nm node SRAM cell.
- In April 2006, AMD demonstrated a 0.370 square micrometer 45 nm SRAM cell.
- In June 2006, Texas Instruments debuted a 0.24 square micrometer 45 nm SRAM cell, with the help of immersion lithography.
- In November 2006, UMC announced that it had developed a 45 nm SRAM chip with a cell size of less than 0.25 square micrometer using immersion lithography and low-k dielectrics.
- In June 2007 Matsushita Electric Industrial Co. started mass production of System-on-a-chip (SoC) for use in digital consumer equipment based on the 45-nm process technology.
Many details about Penryn appeared at the April 2007 Intel Developer Forum. Its successor is called Nehalem. Important advances include the addition of new instructions (including SSE4, also known as Penryn New Instructions) and new fabrication materials (most significantly a hafnium-based dielectric).
Example: Intel's 45 nm process
At IEDM 2007, more technical details of Intel's 45 nm process were revealed.
Since immersion lithography is not used here, the lithographic patterning is more difficult. Hence many lines have been lengthened rather than shortened. A more time-consuming double patterning method is used explicitly for this 45 nm process, resulting in potentially higher risk of product delays than before. Also, the use of high-k dielectrics is introduced for the first time, to address gate leakage issues. For the 32 nm node, immersion lithography will begin to be used by Intel.
- 160 nm gate pitch (73% of 65 nm generation)
- 200 nm isolation pitch (91% of 65 nm generation) indicating a slowing of scaling of isolation distance between transistors
- Extensive use of dummy copper metal and dummy gates
- 35 nm gate length (same as 65 nm generation)
- 1 nm equivalent oxide thickness, with 0.7 nm transition layer
- Gate-last process using dummy polysilicon and damascene metal gate
- Squaring of gate ends using a second photoresist coating
- 9 layers of carbon-doped oxide and Cu interconnect, the last being a thick "redistribution" layer
- Contacts shaped more like rectangles than circles for local interconnection
- Lead-free packaging
- 1.36 mA/um nFET drive current
- 1.07 mA/um pFET drive current, 51% faster than 65 nm generation, with higher hole mobility due to increase from 23% to 30% Ge in embedded SiGe stressors
In a recent Chipworks reverse-engineering, it was disclosed that the trench contacts were formed as a "Metal-0" layer in tungsten serving as a local interconnect. Most trench contacts were short lines oriented parallel to the gates covering diffusion, while gate contacts where even shorter lines oriented perpendicular to the gates.
It was recently revealed that both the Nehalem and Atom microprocessors used SRAM cells containing eight transistors instead of the conventional six, in order to better accommodate voltage scaling. This resulted in an area penalty of over 30%.
Processors using 45 nm technology
- Matsushita has released the 45 nm Uniphier.
- Wolfdale, Yorkfield, Yorkfield XE and Penryn where Intel cores sold under the Core 2 brand.
- Intel Core i7 series processors, i5 750 (Lynnfield and Clarksfield).
- Pentium Dual-Core Wolfdale-3M are current Intel mainstream dual core sold under the Pentium brand.
- Diamondville, Pineview are current Intel cores with Hyper-Threading sold under the Intel Atom brand.
- AMD Deneb (Phenom II) and Shanghai (Opteron) Quad-Core Processors, Regor (Athlon II) dual core processors , Caspian (Turion II) mobile dual core processors.
- AMD (Phenom II) "Thuban" Six-Core Processor (1055T)
- Xenon on Xbox 360 S model.
- Cell Broadband Engine in PlayStation 3 Slim model – September 2009.
- Samsung S5PC110, as known as Hummingbird.
- Texas Instruments OMAP 3 and 4 series.
- IBM POWER7 and z196
- Fujitsu SPARC64 VIIIfx series
- The Wii U "Espresso" IBM CPU.
- IEEE Spectrum: The High-k Solution
- "Report on Penryn Series Improvements." (PDF). Intel. October 2006.
- "New Xbox 360 gets official at $299, shipping today, looks angular and ominous (video hands-on!)". .
- "Sony answears our questions about the new PlayStation 3". .
- Mistry, K.; Allen, C. and Auth, C. and Beattie, B. and Bergstrom, D. and Bost, M. and Brazier, M. and Buehler, M. and Cappellani, A. and Chau, R. and Choi, C.-H. and Ding, G. and Fischer, K. and Ghani, T. and Grover, R. and Han, W. and Hanken, D. and Hattendorf, M. and He, J. and Hicks, J. and Huessner, R. and Ingerly, D. and Jain, P. and James, R. and Jong, L. and Joshi, S. and Kenyon, C. and Kuhn, K. and Lee, K. and Liu, H. and Maiz, J. and Mclntyre, B. and Moon, P. and Neirynck, J. and Pae, S. and Parker, C. and Parsons, D. and Prasad, C. and Pipes, L. and Prince, M. and Ranade, P. and Reynolds, T. and Sandford, J. and Shifren, L. and Sebastian, J. and Seiple, J. and Simon, D. and Sivakumar, S. and Smith, P. and Thomas, C. and Troeger, T. and Vandervoorn, P. and Williams, S. and Zawadzki, K. (December 2007). "A 45nm Logic Technology with High-k+Metal Gate Transistors, Strained Silicon, 9 Cu Interconnect Layers, 193nm Dry Patterning, and 100% Pb-free Packaging".
- Intel 45 nm process at IEDM
- 8T SRAM used for Nehalem and Atom
- Panasonic Begins Mass Production of 45-nm Generation SoC
- Intel 45 nm process is good to go
- Intel moving to 45nm sooner than expected?
- Chipmakers gear up for manufacturing hurdles
- Intel 45 nm node SRAM cell
- An AMD Update
- nm process namingnSlashdot discussion of
- 45 nm Technology from Intel
- Intel 45 nm process at IEDM
|CMOS manufacturing processes||